specifications :: SW•10
For all you audio geeks out there who really want the nitty gritty details.

Acoustic Performance
Free Field Frequency Response: 34 Hz – 110 Hz (±3 dB)
Lower Cutoff Frequency: -3 dB @ 34 Hz
Upper Cutoff Frequency: -3 dB @ 110 Hz
Maximum SPL @ 1 meter, 7.5 dBu into both Balanced Inputs: 103 dB SPL @ 1m

Transducer
Low Frequency Driver: 10 in/254 mm woofer with steel frame,dual voice coil, and paper cone

Amplifiers
Rated Power: 120 watts rms into a 4 ohm load (60 watts rms x 2)
Burst Power: 270 watts rms into a 4 ohm load (135 watts rms x 2)
Slew Rate: > 15 V/µs
Distortion (THD, SMPTE IMD, DIM 100): < 0.03%
Signal-to-Noise Ratio:
> 110 dB, 20 Hz to 20 kHz, A-weighted, referenced to 60 watts into 4 ohms
Type: Monolithic IC, Class AB

Electronic Crossover
Crossover Type: 24 dB/octave Linkwitz-Riley
Crossover Frequency: Variable, 55 Hz to 110 Hz
Input Impedance: 20 kΩ, balanced bridging; 10 kΩ unbalanced

AC Power Requirements
US: 120 VAC, 60 Hz
Europe: 240 VAC, 50 Hz
Korea (AC Power Select at 230 V): 220 VAC, 60 Hz
Japan (AC Power Select at 115 V): 100 VAC, 50/60 Hz
AC Connector: 2-pin IEC 250 VAC, 16 A male
Fuse: 115 VAC: T 1.6 A/250 V
, 230 VAC: T 800 mA/250 V
Power Consumption: 80 watts with music, loud mix
20 watts quiescent (idle)

Physical Dimensions and Weight
Enclosure: 0.625 in/16 mm thick MDF
Damping: Adiabatic fiberfill
Dimensions:
Height: 11.8 in/300 mm
, 12.3 in/312 mm (with feet) Width: 12.0 in/295 mm
Depth: 12.4 in/315 mm
Weight: 28 lb/12.7 kg