Blend 16

specifications :: Blend 16
For all you audio geeks out there who really want the nitty gritty details.

Frequency Response
Mic Input to any Output (Trim at 0 dB): +0, –1 dB, 20 Hz to 20 kHz –3 dB, 10 Hz to 80 kHz

Distortion
THD and SMPTE IMD;
20Hz to 20kHz
Mic Input to Main Output:
< 0.005% @ +4 dBu output

Noise
20 Hz to 20 kHz BW (150 Ω source impedance)
Equivalent Input Noise (EIN): –128 dBu
Residual Output Noise: ( Channel & Main Mix levels off )
Main, Ctrl Room, Phones: –102 dBu
Aux 1 Monitor out –82 dBu
Aux 2 EFX out –92 dBu

Common Mode Rejection Ratio (CMRR)
Mic In: 60 dB @ 1 kHz (Gain @ maximum)

Crosstalk
Adjacent Inputs or Input to Output: –85 dB @ 1 kHz

Input Gain Control Range
Mic In: +3 dB to +50 dB
Line In: –22 dB to + 25 dB

Phantom Power
  +48 VDC

Equalization
Mono Channel EQ:  
High ±15 dB @ 12 kHz
Mid ±15 dB 100 Hz - 8 kHz
Low ±15 dB @ 80 Hz
Stereo Channel EQ:  
High ±15 dB @ 12 kHz
Mid ±15 dB @ 2.5 kHz
Low ±15 dB @ 80 Hz

Mixer Rated Output
Main, Aux, Control Room: +4 dBu
Maximum Rated Output: +18 dBu

Maximum Input Levels
Mic Input: +18 dBu, Gain @ +3 dB
dBInst Input: +18 dBu, Gain @ –22 dB
Stereo Line Input, Tape Input, and Aux Return: +18 dBu

Maximum Voltage Gain
Mic Input to:
Main Output: 74 dB
Tape Output: 74 dB
Aux Sends: 74 dB
Control Room Output: 84 dB
Phones Output: 84 dB
Inst Input to:
Main Output: 49 dB
Tape Output: 49 dB
Aux Sends: 49 dB
Control Room Output: 59 dB
Phones Output: 59 dB
Stereo Line Input to:
Main Output: 20 dB
Tape Output: 20 dB
Aux Sends: 20 dB
Control Room Output: 30 dB
Phones Output: 30 dB
Tape Input to:
Main Output: 10 dB
Tape Output: 10 dB
Control Room Output: 10 dB
Phones Output: 10 dB
Aux Return to:
Main Output: 20 dB
Tape Output: 20 dB
Aux Sends: 20 dB
Control Room Output: 30 dB
Phones Output: 30 dB

Input Impedance
Mic Input: 2.3 kΩ, balanced
Inst Input: 1 MΩ
Stereo Line Input: 20 kΩ, balanced
Stereo Aux Returns: 20 kΩ, balanced
CD/Tape In: 24 kΩ, unbalanced

Output Impedance
Main, Ctrl Room, Aux Sends: 120 Ω
Tape Output: 1 kΩ
Phones Output: 25 Ω

Channel Level Set LED (Sensitivity)
  0 dBu (normal operating level)

Phantom Power
  +48 VDC

VU Meters
Main Left and Right, 8 segments: –24, –12, –4, 0, +4, +8, +12, Clip (+16)
0 LED = 0 dBu

AC Power Requirements
Internal Universal Power Supply, standard IEC connector
Voltage Range 100 VAC to 240 VAC, 50/60 Hz

Physical Dimensions and Weight
Height: Back: 5” (127 mm)
Front: 2.5” (64 mm)
Width: 18.5” (469 mm)
Depth: 16.6” (422 mm)
Weight: 11.5 lbs (5.2 kg)

Internal Effects
32 bit EMAC processing, 2-channel
Sample Rate: 31.25kHz
Bandwidth: 15.6kHz
Number of presets: 16
Parameters: 2 controls

Digital I/O
USB
Bit Depth: 24 bit/16 bit
Sample Rates: 44.1 kHz, 48 kHz,
Output: Main L and R output signal or Subgroup 1-2
Input: Alternate source to stereo channel 15-16